GRP anti-slip flooring

GRP Anti-Slip Flooring Sheets

Improve grip on walkways, ramps, platforms and worn floor areas with durable, corrosion-resistant GRP sheet protection.

View GRP anti-slip products
Request cut-to-size support

Where GRP anti-slip sheets are used

Walkways and platforms

Create a durable slip-resistant walking surface across pedestrian routes, access platforms and service areas.

Worn floor surfaces

Improve smooth, damaged or slippery floors without replacing the full underlying structure.

Cut-to-size projects

Use sheets where site details call for panels cut around equipment, thresholds, machinery or irregular edges.

Why choose GRP anti-slip sheets?

  • Slip-resistant surface for wet, oily, exposed or frequently used areas.
  • Corrosion-resistant GRP construction for industrial and outdoor settings.
  • Lightweight compared with many metal plate alternatives.
  • Can be cut to size for planned maintenance and project work.
  • Useful for broad coverage where strips or nosings are not enough.

Choosing the right anti-slip sheet

The right sheet depends on the area to cover, traffic type, exposure, fixing method, required thickness, colour and whether the sheet needs to be supplied whole or cut to size.

For cut-to-size work, send a sketch, drawing, dimensions or a list of pieces. Photos are useful where sheets need to fit around existing site features.

Useful details to send

  • Area dimensions or cutting list
  • Sheet thickness or duty requirement
  • Indoor, outdoor or chemical exposure
  • Colour, finish or visibility requirements
  • Delivery postcode and target date

Need anti-slip sheets cut to size?

Send the area dimensions, cutting list and site details and we can help with cut-to-size options.

Request cut-to-size support
View anti-slip strips

Technical specification checkpoint

Specify the overlay as a complete retrofit system

GRP sheets and strips improve the surface of a sound substrate. Selection must address the existing structure, edge transitions, aggregate, cover thickness, fixing system and foreseeable contamination.

Substrate firstIdentify steel, concrete, timber, tile or GRP; repair corrosion, rot, cracking, movement and contamination before covering.
Surface gradeChoose aggregate and grit coarseness for footwear, traffic and cleaning. Coarser is not automatically better for every user.
Edges and interfacesCoordinate doors, thresholds, drainage channels, joints and exposed corners so the overlay does not introduce a trip edge.
Fixing systemUse compatible adhesive plus project-appropriate mechanical restraint where required; verify pull-out, edge distance and access beneath.
Specification areaWhat to establishEngineering boundary
Slip evidenceWet and dry PTV, slider, direction, surface condition and report reference.Specify representative contamination; retain the supplier’s test report.
GeometryOverall area, cut sizes, thickness, joint layout, falls and transition details.A surface cover does not correct an unsuitable ramp, stair or walkway geometry.
EnvironmentUV, water, oils, chemicals, temperature, coastal exposure and cleaning agents.Confirm resin, aggregate, adhesive and fastener compatibility.
MaintenanceInspection for loose edges, worn grit, cracks, blocked drainage and bond failure.Set inspection frequency from risk, use and exposure rather than claiming maintenance-free service.

Important: These products are normally non-structural retrofit covers. They must not bridge unsupported gaps or conceal an unsound substrate unless a separately designed system permits it.

Primary references: HSE GEIS2; Approved Document K; and the relevant current project, accessibility and asset-owner requirements.

GRP anti-slip flooring sheet routes

Choose anti-slip sheets by surface, coverage area and fixing method

GRP anti-slip flooring sheets are used to cover larger worn, wet or higher-risk pedestrian surfaces. Confirm the base surface, sheet coverage, edge detail, fixing method and whether cut-to-size support is needed.

Compare anti-slip formats

Choose between sheets, strips, plates, ramp covers and walkway covers for the site condition.

Anti-slip product routes

Plan cut-to-size sheets

Use cut-to-size support where sheets need to fit landings, platforms, thresholds or irregular areas.

Cut-to-size anti-slip products

Check slip guidance

Review surface condition, contamination, cleaning and traffic before specifying an anti-slip route.

Anti-slip guidance

Continue the anti-slip route

Connect anti-slip sheets with strips, stair products and cut-to-size support.

Use these links to move from sheet selection into the wider anti-slip range, installation guidance and project support.

Anti-slip hubReturn to the main anti-slip range and compare formats.Anti-slip stripsCompare sheet coverage with strip routes for walkways and platforms.Stair nosingsReview stair edge protection for step and stairway risks.Cut-to-size anti-slipSend sizes or repeat patterns for prepared anti-slip products.Anti-slip guidanceCheck selection, substrate and installation considerations.Installation guideReview fitting guidance before preparing the surface.

Available to buy or cut to size

Buy GRP anti-slip sheets or request cut panels

Order stocked sheets online, or send sizes and quantities where the sheets need to arrive ready for installation.

Request sheet quoteRequest cut-to-size
Measure the substrate first.

Confirm sheet size, colour, grit duty, fixing method, drainage and edge detail before ordering for worn or uneven surfaces.