Technical guide · Procurement & quotations

GRP Procurement & Specification Checklist

A practical checklist for buyers, estimators, contractors and specifiers comparing GRP grating, flooring, profiles, handrails and access-system components.

GRP Express warehouse interior with racking stocked with GRP profiles, grating and panels ready for dispatch
GRP Express warehouse stock. Compare the complete material and preparation scope.

Technical detail

Compare quotations on the same basis

01Same productConstruction, geometry, resin and finish.
02Same dutyLoad, span, supports and evidence.
03Same preparationCutting, openings, labelling and fixings.
04Same deliveryQuantity, destination, access and programme.

Use this comparison alongside the evidence table below. Record exclusions and unresolved information before comparing totals.

What information should a GRP enquiry include?

  • Product type: grating, flooring, profile, handrail, stair product, cover or access component.
  • Finished dimensions, quantities and preferred panel/profile lengths.
  • Clear unsupported span and support arrangement where structural performance matters.
  • Load case: pedestrian, maintenance, point load, distributed load, wheel load or other project-defined load.
  • Environment: external, marine, chemical, wastewater, electrical, washdown or other exposure.
  • Resin, fire, smoke or chemical-resistance requirements where specified.
  • Surface and aperture requirements including anti-slip finish, mesh opening and drainage.
  • Fixing substrate and any required clips, bolts, baseplates or panel-to-panel connectors.
  • Cut-outs, penetrations, notches, piece marks and drawing references.
  • Delivery address, access restrictions and programme requirement.

What evidence should buyers request?

AreaTypical evidence or informationWhy it matters
Structural performanceLoad/span/deflection data for the exact product configurationDepth or appearance alone does not prove suitability
FireRelevant test report/classification for the exact product or systemGeneric “fire retardant” wording is not a classification
Chemical resistanceResin/product compatibility information for the actual chemical, concentration and temperatureThe resin type alone may be insufficient
Slip resistanceProduct-specific test evidence where requiredSurface description alone does not quantify performance
DimensionsDatasheet or product specification showing actual panel/profile geometryAvoids assumptions around nominal sizes
FixingsRecommended fixing type and installation detailPanel restraint and connection detail affect the installed system

How should GRP quotes be compared?

Compare like with like. A lower panel or profile price is not automatically the lower installed cost if products differ in size, span capability, resin, cutting allowance, fixings, delivery, waste or required site preparation. Where useful, compare cost per usable square metre or per finished component rather than simply cost per stock panel.

Questions to resolve before placing an order

  • Is this a stock purchase or a project-specific requirement?
  • Has the load/span requirement been checked against the exact product?
  • Are all cut-outs and penetrations supported correctly?
  • Are the specified fixings compatible with the grating/profile and substrate?
  • Does the project require particular resin, fire, chemical or electrical evidence?
  • Should material be supplied full size, cut to size, labelled or packed by area?
  • Are there delivery restrictions for long profiles or full-size panels?

Related technical guidance

Use How to Specify GRP, the GRP Standards & Specification Hub, GRP Resin Guide, load guidance and cut-to-size GRP to develop the enquiry further.

GRP tender, RFQ and procurement submissions

For a tender or request for quotation, define the product type, performance requirements, test evidence, dimensions, cutting schedule, fixings and delivery assumptions. State the criteria for an acceptable equivalent product so suppliers quote on the same basis.

Approved equal, equivalent product and substitution checks

When considering an equivalent product or a substitution, compare dimensions, resin, load and span data, fire and slip-resistance evidence, fixings and required project approvals. A similar product name alone does not establish suitability.

Project-based procurement example

Two platforms does not mean two identical material kits.

Vital GRP’s P1712 Saxilby HVAC Access O&M records two access stair platforms serving three HVAC tanks. For an Express material enquiry based on an agreed design, keep the asset count, assembly references and component quantities separate. Use this Vital installation record to structure the material enquiry; confirm the supply scope separately with GRP Express.

  • Asset schedule: identify each tank or item of equipment and the working position it needs.
  • Assembly schedule: give each stair, landing and platform its drawing reference, revision and location.
  • Material schedule: list grating panels, profiles, guarding and fixings by finished size, quantity, piece mark and preparation.
  • Handover scope: agree which drawings, material records, installation information and maintenance instructions are included in the quotation.

The Saxilby manual’s installed-drawing note includes the drawing comments. Carry those accepted notes into the order rather than relying on a drawing number alone.

Record the load-table assumptions in the enquiry

VGRP-DS-32 Standard Mesh Grating separates its tables by grating width, thickness and unsupported span, with distinct point-load and distributed-load entries. Record the exact product and loading/support assumptions when requesting evidence. A copied table figure does not establish the capacity of the frame, connections or complete access system.

Source references: P1712 Saxilby HVAC Access O&M and VGRP-DS-32 Standard Mesh Grating. No project load capacity or standard kit quantity is inferred.

Send a referenced material schedule → or compare the profile range.

Enquiry checklist

Keep the quotation and drawing revisions aligned

Give each supplier the same current pack and record the response against it. A product description can stay the same while cut-outs, supports or preparation change.

RecordIdentifier to includeDecision to close
Arrangement drawingDrawing number and revisionAre dimensions, supports and interfaces agreed?
Product evidenceExact product and document referenceDoes the evidence match the proposed duty?
Preparation schedulePiece mark, quantity and finished sizeAre cutting, holes and labelling included?
Quotation clarificationsQuery reference, owner and statusAre exclusions and unresolved inputs recorded before release?

Prepare a cutting and component schedule →

What to confirm before ordering

  • The exact product description, quantities and dimensions agree.
  • Required load/span and environmental evidence is identified.
  • Cutting, openings, edge details and fixings are included or clearly excluded.
  • Substitutions are compared against the project requirements.
  • Delivery, handling and site restrictions are stated.
  • Open technical questions and required approvals are recorded.