Technical guide · Structural profile sizes

GRP Profile Sizes Guide

Find GRP structural profiles by section type, nominal dimensions and length. Use this guide to find profiles by size, then check the current product options and data.

Two grey GRP angle sections showing their L-shaped cross-sections
Actual GRP angle sections. Nominal size alone does not describe the complete section.

Technical detail

Read the section before comparing sizes

Illustrative cross-sections, not to scale. Use the exact product drawing for dimensions, thickness and section properties.

01Choose the shapeAngle, channel, box, beam, flat or tube.
02Record geometryExternal dimensions and wall thickness.
03Check performanceOrientation, span, loading and connections.
04Plan cut lengthsStock length, quantities and delivery.

Compare GRP profile sizes

Profile descriptionProduct typeWhat to verify
50×50 GRP box sectionSquare hollow profileOutside dimensions, wall thickness, length and load requirement
50×50 GRP angleEqual angleLeg size, thickness, orientation and connection detail
100×50 GRP channelC/U channelDepth, flange width, wall thickness and orientation
GRP I-beam sizesI sectionSection properties, span, load, restraint and connection
GRP tube sizesRound/square/rectangular tubeOutside dimensions, wall thickness, length and duty
6m GRP profileAny long pultruded section where availableActual stocked length, delivery arrangements and cutting requirement

Choose the profile type

Need cut lengths?

For repeated or project-specific lengths, use cut-to-length GRP profiles or the profile cut-list calculator.

Enquiry checklist

What to confirm before ordering

  • Profile shape and exact product reference.
  • Outside dimensions, wall thickness and required orientation.
  • Finished lengths, quantities and cutting requirements.
  • Load, span, restraint and connection information where relevant.
  • Resin, exposure, finish and required technical evidence.
  • Stocked length and transport arrangements confirmed before ordering.