GRP GRATING FIXINGS
GRP C Clips for Panel-to-Panel Fixing
Panel-to-panel clips for aligning adjacent GRP grating.
What this fixing does
C clips connect neighbouring grating panels to improve alignment and reduce relative movement at a supported joint.
Use it for
tying adjacent compatible grating panels together.
Do not treat it as
supporting a free edge or securing the panel assembly to the structure.
Clips restrain grating; they do not replace structural bearing or correct an unsupported panel edge.
Selection checks before ordering
- Confirm both panels share a compatible mesh and depth.
- Use only where panel edges have the required support and bearing.
- Allow access to tighten and inspect the connection.
- Combine with suitable hold-down fixings where the panel must be secured to the frame.
For exposed or corrosive environments, confirm the fixing material and compatibility with the support structure. If details are uncertain, send photographs or a drawing with the grating depth and support dimensions.
Choose the right clip route
| Fixing route | Main purpose | Important limitation |
|---|---|---|
| M clips | Hold a compatible open-mesh panel to a support | Must match mesh, depth and support detail |
| C clips | Align adjacent compatible panels | Do not support a free edge |
| G clips and clamps | Clamp grating to an accessible support flange | Support geometry and access must suit |
| Direct-fix clips | Secure into an approved substrate | Fastener choice is substrate-specific |
Buy GRP grating clips and clamps
Current online products will appear below as the fixing catalogue is populated. Shop the category now, or send the grating and support details for compatibility help.
-
12mm Screen Guard Mesh GRP Grating M-Clips – Full Assembly – Pack of 8 – 316/A4 Stainless Steel
£19.44 ex VAT Add to basket -
14-22mm Mini Mesh GRP Grating M-Clips – Full Assembly – Pack of 8 – 316/A4 Stainless Steel
£13.76 ex VAT Add to basket -
22mm Mini Mesh GRP Grating G-Clamps – Full Assembly – Pack of 8 – 316/A4 Stainless Steel
£19.82 ex VAT Add to basket -
25-38mm Open Mesh GRP Grating J-Clamps – Full Assembly – Pack of 8 – 316/A4 Stainless Steel
£26.48 ex VAT Add to basket
GRP C Clips for Panel-to-Panel Fixing FAQs
Can a C clip support an unsupported panel edge?
No. A panel-to-panel clip aligns adjacent panels but does not provide structural bearing beneath a free edge.
How many clips do I need?
The quantity depends on panel dimensions, support lines, perimeter edges, panel joints, uplift, vibration and project instructions. An ordering pack size is not a universal fixing layout.
Can I substitute another clip type?
Only after checking its purpose, geometry, materials, bolt or fastener, support interface and installation access against the actual grating system.