Which standard applies to GRP grating?

It depends on application. Industrial flooring commonly references BS 4592-0 context, while machinery access may involve BS EN ISO 14122. Project-specific load, span, deflection, fixing and slip evidence must still be checked.

Which standard covers pultruded GRP profiles?

The BS EN 13706 series is commonly used for pultruded profile designation, test methods and profile requirements. The actual profile properties and direction of load remain important.

Can GRP Express certify a whole installation?

GRP Express can support product selection and supply information, but final project design, installation suitability, structural verification and regulatory compliance remain project responsibilities unless separately contracted.

Technical assurance and buying support

GRP Standards and Specification Hub

Use this page to route a GRP enquiry through the right standards, evidence and project checks before choosing grating, profiles, handrails, access systems or anti-slip products.

Start with the product and application

GRP specifications often fail when a standard is named without defining the actual application, load, resin, span, fixing method, substrate, slip condition or environmental exposure. This hub helps buyers decide what evidence to request and where GRP Express can support product selection.

Grating and flooring

Define panel type, depth, mesh, span, load, deflection, fixing method, cut-outs and slip resistance evidence.

Load tables and calculator

Pultruded profiles

Use declared profile properties, fibre direction, resin, drilling/cutting requirements and application-specific checks.

Profile guide

Access and guarding

Handrails, stairs, ladders and platforms need route geometry, loads, openings, post spacing and support details checked.

Access systems

Common standards and what they help with

Reference	Useful for	Specification caution
BS EN 13706 series	Pultruded GRP profile designation, test methods and profile requirements.	Profile grade and properties must match the actual section, direction and use case.
BS 4592-0	Industrial flooring, stair treads and handrails; common design and installation considerations.	Use the current project scope and do not assume a generic panel is acceptable for every span or load.
BS EN ISO 14122 series	Permanent means of access to machinery, including platforms, walkways, stairs and ladders.	Applies where machinery access is in scope; building and client requirements may also apply.
BS 8300 / Approved Document M context	Inclusive access, visual contrast and public-facing accessibility considerations.	Confirm scope, building type and whether public access or dutyholder requirements apply.
HSE slip-resistance guidance	Interpreting slip evidence such as pendulum testing and contamination conditions.	PTV, SRV and ramp ratings are not interchangeable; test condition matters.
WIMES and asset-owner specifications	Water industry and utility project requirements.	Client specifications may set resin, colour, fire, loading, fixing and documentation requirements.

Specification route by product family

Grating guideMesh, depth, resin, load, fixing and cut-to-size choices.Moulded vs pultrudedChoose open mesh or directional pultruded flooring.Chemical resistanceCompare resin choices and verify exposure.Fire and resinCheck resin and project performance expectations.Slip resistanceUnderstand PTV, SRV, R ratings and contamination.Handrail loadingReview system loading and boundary conditions.BIM and designUse models, drawings and design-resource routes.Technical supportSend project evidence before procurement.

Need a specification checked before buying?

Send the project standard, product family, span or dimensions, exposure, loading, drawings and delivery timing. We can help route the requirement into stocked products, cut-to-size support or a technical enquiry.

Shop GRP products Request technical support How to specify GRP